<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>计匠网论坛 - BIOS资料区</title>
    <link>https://www.ufoit.com/forum-20-1.html</link>
    <description>Latest 20 threads of BIOS资料区</description>
    <copyright>Copyright(C) 计匠网论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Sun, 19 Apr 2026 14:01:09 +0000</lastBuildDate>
    <ttl>30</ttl>
    <image>
      <url>https://www.ufoit.com/static/image/common/logo_88_31.gif</url>
      <title>计匠网论坛</title>
      <link>https://www.ufoit.com/</link>
    </image>
    <item>
      <title>求助没有bblkinit.equ请高手发给我 746732546@qq.com</title>
      <link>https://www.ufoit.com/thread-1896-1-1.html</link>
      <description><![CDATA[thank you]]></description>
      <category>BIOS资料区</category>
      <author>tungyuebing</author>
      <pubDate>Fri, 09 May 2014 10:01:25 +0000</pubDate>
    </item>
    <item>
      <title>新人求解怎麼樣看BIOS的code</title>
      <link>https://www.ufoit.com/thread-1032-1-1.html</link>
      <description><![CDATA[BIOS的code打開太多了，不知道從哪裡開始看，求解？]]></description>
      <category>BIOS资料区</category>
      <author>pitycompal</author>
      <pubDate>Fri, 14 Dec 2012 08:00:29 +0000</pubDate>
    </item>
    <item>
      <title>Intel Xeon 5600系列MSR寄存器问题</title>
      <link>https://www.ufoit.com/thread-1012-1-1.html</link>
      <description><![CDATA[IA32_PERF_CTL和IA32_PERF_STATUS两个寄存器的位定义是什么样的，以及如何控制的？以及上述寄存器与IA32_MPERF 、IA32_APERF是个什么关系？]]></description>
      <category>BIOS资料区</category>
      <author>huangjinli73</author>
      <pubDate>Mon, 26 Mar 2012 13:26:33 +0000</pubDate>
    </item>
    <item>
      <title>[原创]BIOS知识点滴Follow Bini之-ACPI BIOS: Intel CPU Power management</title>
      <link>https://www.ufoit.com/thread-1006-1-1.html</link>
      <description><![CDATA[2011年最最后一天，直接上两年多前做的一张图，后面C states部分我E文表述不好的确不好，同时也没附上详细的资料，还需大家多翻Spec，当然勾起大家去翻Spec也是文章目的之一，哈哈。

最近技术上的事情较少直接触及，辛苦昆山的兄弟们！

老鸟见不对就请直喷，拉都可以 ...]]></description>
      <category>BIOS资料区</category>
      <author>bini</author>
      <pubDate>Sat, 31 Dec 2011 02:41:34 +0000</pubDate>
    </item>
    <item>
      <title>EDID是干嘛的</title>
      <link>https://www.ufoit.com/thread-974-1-1.html</link>
      <description><![CDATA[因为工作原因接触BIOS，以前从没碰过，网上资料也很少，关于EDID的spec更少，EDID究竟指什么？起到什么作用，我们能从中获得什么值？
有spec的话更好，我的邮箱:1399360625@qq.com,求大侠指点]]></description>
      <category>BIOS资料区</category>
      <author>archmd_duwei</author>
      <pubDate>Wed, 04 May 2011 12:15:00 +0000</pubDate>
    </item>
    <item>
      <title>[转载]VFR Programming Language v1.3 PDF 2010-2-12</title>
      <link>https://www.ufoit.com/thread-942-1-1.html</link>
      <description><![CDATA[Contents
1 Introduction.....................................................................................................1
1.1 Overview..............................................................................................1
1.2 Target Audie .]]></description>
      <category>BIOS资料区</category>
      <author>bini</author>
      <pubDate>Tue, 28 Dec 2010 09:30:01 +0000</pubDate>
    </item>
    <item>
      <title>Reset Control</title>
      <link>https://www.ufoit.com/thread-930-1-1.html</link>
      <description><![CDATA[Reset Control 
1.Reset Introduction

Reset机制是BIOS中一个很基本的动作，很多部分的操作往往需要做一下Reset然后才能正常工作。Reset如影随形无处不在，哪个功能不正常就Reset一下呗（玩笑而已：）），Reset在BIOS code中还真是挺多的，翻翻code就会找到像MRC初始化 ...]]></description>
      <category>BIOS资料区</category>
      <author>peterhu</author>
      <pubDate>Fri, 29 Oct 2010 08:27:02 +0000</pubDate>
    </item>
    <item>
      <title>PCI IRQ Routing</title>
      <link>https://www.ufoit.com/thread-929-1-1.html</link>
      <description><![CDATA[PCI IRQ Routing

1.Why IRQ Routing 

在计算机发展的历史中，很多技术的出现都是为了解决当前所面临的问题而产生和发展出来的，PCI IRQ Routing也不例外，随着计算机系统的功能需求的增加，越来越多的PCI/PCIE设备被加入到系统中来，可是PIC mode下却只有15 个IRQ可供 ...]]></description>
      <category>BIOS资料区</category>
      <author>peterhu</author>
      <pubDate>Fri, 29 Oct 2010 08:17:40 +0000</pubDate>
    </item>
    <item>
      <title>PIC 、APIC(IOAPIC LAPIC)</title>
      <link>https://www.ufoit.com/thread-928-1-1.html</link>
      <description><![CDATA[PIC 、APIC(IOAPIC LAPIC)
1. Overview

PIC全称Programmable Interrupt Controller，通常是指Intel 8259A双片级联构成的最多支持15个interrupts的中断控制系统。APIC全称Advanced Programmable Interrupt Controller，APIC是为了多核平台而设计的。它由两个部分组成IOA ...]]></description>
      <category>BIOS资料区</category>
      <author>peterhu</author>
      <pubDate>Fri, 29 Oct 2010 08:11:58 +0000</pubDate>
    </item>
    <item>
      <title>EFI Howto， driver binding的实质</title>
      <link>https://www.ufoit.com/thread-922-1-1.html</link>
      <description><![CDATA[Google docs文档，会翻墙的看看，不会翻墙的就先去找梯子。

EFI Howto， driver binding的实质
https://docs.google.com/fileview?id=0B3M7WqiAoyr_OTQyOGI0MzUtZGQ5Ny00MjQ1LTg2MDItMjk4MDAyOGM3NjMw&amp;hl=en&amp;authkey=COST1twP]]></description>
      <category>BIOS资料区</category>
      <author>freevanx</author>
      <pubDate>Fri, 08 Oct 2010 10:08:48 +0000</pubDate>
    </item>
    <item>
      <title>CPU Power States</title>
      <link>https://www.ufoit.com/thread-918-1-1.html</link>
      <description><![CDATA[C-state
1. Overview


C-state是ACPI spec定义的CPU工作在G0时的power states，这些状态包括C0,C1,C2,C3…Cn.其中C0被称为Active状态，也只有C0的时候CPU才会执行指令；其余的状态则被称为sleeping，这时CPU是不执行指令的，也因而会节省更多的功耗。系统在运行时会根 ...]]></description>
      <category>BIOS资料区</category>
      <author>peterhu</author>
      <pubDate>Fri, 01 Oct 2010 12:42:05 +0000</pubDate>
    </item>
    <item>
      <title>Cache As Ram</title>
      <link>https://www.ufoit.com/thread-917-1-1.html</link>
      <description><![CDATA[Cache As Ram

1. Why need Cache?

Cache又称之为高速缓存，是为了弥补CPU和主存之间逐渐增大的速度上的差距 而被迫在两者之间加入的一个小的SRAM。现代处理器上通常都会有三级或者是四级缓存，这部分高速缓存通常被集成在CPU上，这些高速缓存也就是通常所讲的L1 L2 L3 ...]]></description>
      <category>BIOS资料区</category>
      <author>peterhu</author>
      <pubDate>Fri, 01 Oct 2010 12:29:26 +0000</pubDate>
    </item>
    <item>
      <title>smbus base address SB800(AMD)</title>
      <link>https://www.ufoit.com/thread-907-1-1.html</link>
      <description><![CDATA[请教高手，smbus 在SB700 里很好找到，直接搜索smbus base address 就可以找到想要的结果，而在SB800里面为什么就没有SMbus base address 定义了呢，用rw打开B0 D14 F0 只有第一行有data ，其他的都是00 .不解，请各位高手请教，如何在SB800里得到SMBus base address ？ ...]]></description>
      <category>BIOS资料区</category>
      <author>huazicumt</author>
      <pubDate>Fri, 27 Aug 2010 06:36:43 +0000</pubDate>
    </item>
    <item>
      <title>Programming Interface for Bus Master IDE Controller Revision 1.0</title>
      <link>https://www.ufoit.com/thread-893-1-1.html</link>
      <description><![CDATA[Programming Interface for Bus Master IDE Controller Revision 1.0
1994/05/16

This document defines a register level programming interface for a bus master ATA compatible (IDE) disk
controller that directly moves data between IDE devices and main memo]]></description>
      <category>BIOS资料区</category>
      <author>bini</author>
      <pubDate>Wed, 14 Jul 2010 06:53:56 +0000</pubDate>
    </item>
    <item>
      <title>[转载]我所知道的BIOS系統架構2</title>
      <link>https://www.ufoit.com/thread-889-1-1.html</link>
      <description><![CDATA[任何 firmware 都有相對應的硬體;也唯有深入瞭解硬體,才能寫出好的 firmware ! (當然,對 programming language 很熟,有技巧的的人可以寫出好的 firmware,但是,另一個層面是:對硬體很瞭解,所以所寫的firmware 與 H/W 搭配良好,這也是另一種值得追求的地步)

BIOS 就是 \&quot; ...]]></description>
      <category>BIOS资料区</category>
      <author>sdwenyliu</author>
      <pubDate>Thu, 01 Jul 2010 04:02:25 +0000</pubDate>
    </item>
    <item>
      <title>[转载]我所知道的BIOS-&gt;[PowerOn Sequence &amp; BIOS Entry] 3</title>
      <link>https://www.ufoit.com/thread-888-1-1.html</link>
      <description><![CDATA[我所知道的BIOS-&gt;[PowerOn Sequence &amp; BIOS Entry] 3 
在此將以DeskTop platform來說明(Notebook platform 的 power-on sequence 牽涉到 EC,可參考討論區中 \&quot;power on sequence\&quot; 文章);還有,所敘為rough flow,詳細的時序圖依據design會有些許不同.

[Power-On sequence] ...]]></description>
      <category>BIOS资料区</category>
      <author>sdwenyliu</author>
      <pubDate>Thu, 01 Jul 2010 04:01:25 +0000</pubDate>
    </item>
    <item>
      <title>[转载]我所知道的BIOS -Jumpless 4</title>
      <link>https://www.ufoit.com/thread-887-1-1.html</link>
      <description><![CDATA[上一篇所提到的是:BIOS entry point. 它是第一個被 CPU 所抓取並執行指令之處.每家BIOS都有其相應的 file,要牢記.

在本文中,要提及: Jumpless ! 在此要先說明Jumpless的意義.它代表:\&quot;用 s/w方式來 config clockgen generator,使之產生正確的 頻率s 來供應系統運作\&quot;. 重 ...]]></description>
      <category>BIOS资料区</category>
      <author>sdwenyliu</author>
      <pubDate>Thu, 01 Jul 2010 03:35:07 +0000</pubDate>
    </item>
    <item>
      <title>[转载]我所知道的BIOS- Chipset Config 5</title>
      <link>https://www.ufoit.com/thread-886-1-1.html</link>
      <description><![CDATA[一旦正確的頻率供給給system後, BIOS便依據既定的POST table(類似行程表)來做事. 首先,與chipset最為相關的便是 [chipset config stage]. 意即,在此階段BIOS必須對 chipset registers填入正確的值,俾使其正常運作. 一般而言,要config下列的 devices:
- NB(還記得前面有 ...]]></description>
      <category>BIOS资料区</category>
      <author>sdwenyliu</author>
      <pubDate>Thu, 01 Jul 2010 03:31:10 +0000</pubDate>
    </item>
    <item>
      <title>[原创]IGD Display Switch</title>
      <link>https://www.ufoit.com/thread-793-1-1.html</link>
      <description><![CDATA[IGD Display Switch

1. Introduction

IGD OpRegion是intel为了改善传统的Integrated Graphics Driver和BIOS之间的通信机制即SMI、INT10存在的缺陷（SMM mode有可能会影响OS的稳定性，Int 10则有可能受限于OS)，而引入的一种新的接口。它使用SCI取代传统的SMI机制，取 ...]]></description>
      <category>BIOS资料区</category>
      <author>peterhu</author>
      <pubDate>Sun, 27 Dec 2009 05:52:30 +0000</pubDate>
    </item>
    <item>
      <title>Documentation − How to debug ACPI Problems</title>
      <link>https://www.ufoit.com/thread-776-1-1.html</link>
      <description><![CDATA[以前收集的一篇文档，Linux下debug ACPI 
http://docs.google.com/fileview?id=0B3M7WqiAoyr_ZDhlY2E1ZjAtZTI1Mi00Y2M2LWE0YWQtN2E0YjRmNjQ4YzM4&amp;hl=en]]></description>
      <category>BIOS资料区</category>
      <author>freevanx</author>
      <pubDate>Fri, 20 Nov 2009 13:12:57 +0000</pubDate>
    </item>
  </channel>
</rss>